
It's nearly the end of the year, and C&H Precision is asking gun owners a simple question: when was the last time you cleaned your gun and the gear mounted to it? Carbon, dust, sweat and fingerprints build up every time you train, and most of it ends up on the parts you rely on to see your target. C&H recommends using the final weeks of the year to give every part of the setup some attention and make sure it is properly maintained.
Clean and lube the gun. The process starts with the firearm itself. After confirming the gun is unloaded, owners can use CHLP All-In-One Gun Cleaner, Lubricant & Protectant by applying a generous amount to a patch on a cleaning rod or bore snake to clean the bore. A small amount on a microfiber cloth wipes down the slide, frame and remaining metal, and a CHLP-dipped cotton swab reaches the tight spots. C&H advises going light when lubricating moving parts like the slide rails and trigger mechanism, since excess lubricant pulls in dirt and debris.
Clear up the glass. Pistol red dots, rifle optics and scopes all collect carbon and fingerprints over a year of use. Paragon Optics Lens Cleaner is a non-abrasive formula made for optics, scopes, sights and lasers, and it is safe on reflective coatings. C&H recommends clearing loose grit off the lens first, then applying two to three drops, working the solution in a circular motion with a cotton swab and wiping clean with a non-abrasive microfiber cloth. Owners should also check the battery while the optic is clean and swap in a fresh one if the dot looks weak. For range bags, Paragon Optic Lens Cleaner Wipes come in a 10 pack with the same formula in a single wipe.
Restore the weapon light. Sticky carbon on a weapon light lens cuts light output. Paragon WLC Weapon Light Cleaner removes that buildup and restores the light to full intensity, replacing makeshift methods like toothpaste or pencil erasers that can scratch the lens. With the firearm unloaded and the light removed, owners apply five to six drops to the lens, let it stand for 15 to 30 seconds, work it with a cotton swab in a circular motion until the carbon dissolves, then wipe clean with a non-abrasive cloth.
Check the hardware and know when to reach out. Once everything is clean, C&H suggests a close look for chips or deep scratches in the glass, a dot that flickers even with a fresh battery, mounting screws that keep backing out, or a zero that keeps wandering. When an optic comes off its plate, C&H recommends installing new mounting screws rather than reusing the old ones. The C&H MRDS Maintenance Kit includes T8 and T10 Torx bits and a 10 in-lb torque limiter so everything goes back on to spec.
C&H optics are covered for the life of the product on the housing and glass, and for five years from the manufacture date on the LED, under normal personal use, per the C&H Optics Warranty. Owners who spot an issue can file a warranty claim online.
The full line of Paragon cleaners is available at chpws.com/paragon.
About C&H Precision
C&H Precision is a family owned and operated small business serving the shooting community from its shop in Richmond Hill, Georgia. The company builds red dot adapter plates and C&H optics and provides pistol slide milling services. Learn more at chpws.com.
